Alveolar Bone and Gingival Changes in Mandibular Anterior Region Following Herbst Appliance Therapy: A Systematic Review and Meta-analysis.

Objective: To assess the alveolar bone changes and gingival recession following Herbst appliance therapy. Materials and methods: Electronic databases such as PubMed, Ovid, Cochrane Library, Lilacs, Scopus, Web of Science, and Embase were searched until August 2022. Hand-searching of major orthodontic journals was performed to identify all peer-reviewed articles potentially relevant to the review. The quality of the selected studies was ranked using the revised Cochrane risk of bias tool for nonrandomized trials-Risk of Bias In Nonrandomized Studies (ROBINS) 1. Results: Five relevant articles (all nonrandomized studies) were considered for qualitative analysis. The risk of bias was low for four studies and moderate for one. The reduction in the vertical alveolar bone height was 0.13 ± 0.07 mm, with the Herbst appliance. The mean difference in the loss of buccal cortical thickness between the Herbst appliance and untreated control group was 0.22 mm [95% confidence interval (CI) of -0.62-0.18]. Subsequent to Herbst appliance therapy, in the mandibular anterior region 0.1 ± 0.5 mm of gingival recession was observed. Conclusion: Herbst appliance treatment produces a negligible reduction in the buccal cortical thickness, vertical alveolar bone height, and gingival recession. Clinical significance: Though the changes produced by the Herbst appliance were minimal, they are clinically important considering the young age of the patients warranting periodic periodontal assessment. How to cite this article: Kumar MV, Kannan A, Kailasam V. Alveolar Bone and Gingival Changes in Mandibular Anterior Region Following Herbst Appliance Therapy: A Systematic Review and Meta-analysis. Int J Clin Pediatr Dent 2024;17(1):114-120.

Evaluation of a novel, low-cost, 3D printed video laryngoscope with borescope in anesthetized Beagle dogs.

OBJECTIVE: To develop and evaluate a low-cost three-dimensional (3D)-printed video laryngoscope (VLVET) for use with a commercial borescope. STUDY DESIGN: Instrument development and pilot study. ANIMALS: A total of six adult male Beagle dogs. METHODS: The VLVET consisted of a laryngoscope handle and a Miller-type blade, and a detachable camera holder that attached to various locations along the blade. The laryngoscope and camera holder were 3D-printed using black polylactic acid filament. Dogs were premedicated with intravenous (IV) medetomidine (15 µg kg-1) and anesthesia induced with IV alfaxalone (1.5 mg kg-1). The VLVET, combined with a borescope, was used for laryngeal visualization and intubation. Performance was evaluated by comparing direct and video-assisted views in sternal recumbency. The borescope camera was sequentially positioned at 2, 4, 6, 8 and 10 cm from the blade tip (distanceLARYNX-CAM), which was placed on the epiglottis during intubation or laryngoscopy. At the 10 cm distanceLARYNX-CAM, laryngeal visualization was sequentially scored at inter-incisor gaps of 10, 8, 6, 4 and 2 cm. Laryngeal visualization scores (0-3 range, with 0 = obstructed and 3 = unobstructed views) were statistically analyzed using the Friedman's test. RESULTS: Under direct visualization, the 2 cm distanceLARYNX-CAM had a significantly lower score compared with all other distanceLARYNX-CAM (all p = 0.014) because the view was obstructed by the camera holder and borescope camera. With both direct and camera-assisted views, visualization scores were higher at inter-incisor gaps ≥ 4 cm compared with 2 cm (all p < 0.05). CONCLUSIONS AND CLINICAL RELEVANCE: During laryngoscopy and intubation, the VLVET and borescope facilitated both direct and video laryngoscopy at distanceLARYNX-CAM in Beagle dogs when inter-incisor gaps were ≥ 4 cm.

A Case Report of Fracture of the Segment of Maxillary Alveolar Process Involving Primary Incisors.

Traumatic dental injuries (TDIs) have significant long-term consequences for the oral cavity's hard and soft tissues. Alveolar process fractures are particularly complicated. This case report describes the management and 12-month follow-up of a segmental maxillary alveolar process fracture involving laterally luxated primary incisors. A case of a 4-year-old boy was reported to the hospital 1 hour after an accidental fall at school, which resulted in a fracture of the maxillary alveolar process. Emergency treatment consisted of fracture reduction and repositioning of the primary incisors, followed by a semirigid splint between maxillary canines. The splints were removed at the end of week 4, and the affected primary incisors remained asymptomatic.

Contributions of Digital Simulation to Orthodontic Therapeutic Decision-Making: A Case Report.

Adult orthodontics aims to achieve optimal functional and aesthetic corrections. However, for several reasons, some patients will wish to benefit from a limited treatment where only certain aspects of a malocclusion will be corrected. In these clinical situations, the therapeutic objectives must be adjusted to the individual needs of the patient insofar as they can bring them real benefits. The use of digital technology makes it possible to study the therapeutic possibilities better and visualize the occlusal results before choosing the best therapeutic approach, especially in cases requiring customization. The aim of this clinical case report is to illustrate the orthodontic compromise made after the analysis of the digital setup in an adult patient who presented with a class III malocclusion but refused orthodontic-surgical therapy and requested an alternative treatment.

Investigation of the Mesiodistal Angulations of Maxillary Canines and Central Incisors for Missing Bilateral Maxillary Lateral Incisor.

(1) Background: A missing bilateral maxillary lateral incisor (MBMLI) causes aesthetic and functional problems and a multidisciplinary approach is required for treatment. This study aimed to compare the changes in the mesiodistal axial angulations of the maxillary canines and central incisors with orthodontic treatment of MBMLI. (2) Methods: A total of 56 patients with MBMLI were included in the study, and three groups were formed: the control group (Group 1, n = 20) with untreated ideal occlusion and the space opening (Group 2, n = 20) and space closure (Group 3, n = 16) groups as treated study groups. The mesiodistal angulations between the long axes of the maxillary right canine (tooth no 13), right central incisor (tooth no 11), left central incisor (tooth no 21) and maxillary left canine (tooth no 23), and the bicondylar plane, were measured on the panoramic radiographs taken pre (T0) and post treatment (T1). p < 0.05 was accepted for statistical significance. (3) Results: At T0, while there was no significant difference between the mesiodistal angulations of the right-left maxillary canines and central incisors in all groups (p > 0.05), the mesiodistal angulations of the canines in the Group 1 were significantly higher than the study groups (p < 0.05). With treatment, while the mesiodistal angulation of the canines increased in Group 2, it decreased in Group 3 (p < 0.05). On the other hand, the mesiodistal angulation of the central incisors decreased in Group 2 and did not change in Group 3 (p > 0.05). At T1, the mesiodistal angulation of the canines was found to be lower in Group 3 than in Groups 1 and 2, while the angulation of the central incisors was found to be lower in Group 2 compared to Group 1 (p < 0.05). (4) Conclusions: In the orthodontic treatment of MBMLIs, changes in the mesiodistal angulations of the maxillary canine and central incisors should be taken into account for satisfactory outcomes. It was concluded that there should be a tendency to select the space closure method in which normal mesiodistal angulations are obtained in maxillary central incisors for aesthetics and planned incisor position, and also at a low cost.

The Hydrostatic Pressure Distribution in the Periodontal Ligament and the Risk of Root Resorption-A Finite Element Method (FEM) Study on the Nonlinear Innovative Model.

Excessive orthodontic force can induce inflammatory tooth root resorption due to sustained high stresses within the periodontal ligament (PDL). This study aimed to analyze the PDL pressures during upper incisor retraction using the en masse method with TISAD. The finite element method (FEM) ensured consistent conditions across cases. The models included bone geometry, adjacent teeth, PDL, and orthodontic hardware, analyzed with LS-Dyna. The pressure ranged from 0.37 to 2.5 kPa across the dental arch, with the central incisors bearing 55% of the load. The pressure distribution remained consistent regardless of the force or hook height. The critical pressure (4.7 kPa) was exceeded at 600-650 g force, with notable pressure (3.88 kPa) on the palatal root wall of the right central incisor. Utilizing 0.017 × 0.025 SS archwires in MBT 0.018 brackets provided good torque control and reduced the root resorption risk when forces of 180-200 g per side were applied, maintaining light to moderate stress. Triple forces may initiate resorption, highlighting the importance of nonlinear finite element analysis (FEA) for accurate oral cavity simulations.

Dentin hypersensitivity and toothache among patients diagnosed with Molar-Incisor Hypomineralization: A systematic review and meta-analysis.

OBJECTIVES: To determine the prevalence of dentin hypersensitivity (DH) and toothache in patients with Molar-Incisor Hypomineralization (MIH); and evaluate whether patients with MIH have greater likelihood of presenting DH/toothache than controls. DATA: Studies evaluating DH/toothache in patients with MIH were included. Studies focusing on other enamel defects were excluded. SOURCES: Eight databases, including grey literature, were searched in January 2024. STUDY SELECTION: The methodological quality of studies was assessed using the Joanna Briggs Institute checklist for Cross-sectional studies. Proportion and association meta-analyses, subgrouped by diagnostic methods, were conducted. The certainty of evidence was assessed using GRADE approach. RESULTS: Fifteen studies were included in the qualitative analysis and fourteen in the meta-analyses. Two studies fulfilled all items of the methodological quality checklist. The overall prevalence of DH/toothache among patients with MIH was 45 %. Prevalence rates of 30 %, 47 %, and 55 % were estimated based on proxy reports, self-reports, and air stimulation, respectively. The overall prevalence of DH/toothache per tooth was 22 %, ranging from 16 % to 29 % according to the diagnostic method. Patients with MIH demonstrated higher likelihood of presenting proxy reports of DH/toothache compared to those without MIH (OR: 1.51, 95 % CI [1.23-1.85], P < 0.01, I2: 0 %). The certainty of evidence was very low, mainly due to the low methodological quality of included studies and high inconsistency. CONCLUSIONS: The global prevalence of DH/toothache was 22 %, per tooth, and 45 % per patient. Estimates vary according to diagnostic methods. Patients with MIH showed higher likelihood of presenting proxy reports of DH/toothache than controls. CLINICAL SIGNIFICANCE: This systematic review contributes valuable information to the dental literature by assessing the prevalence and associated factors of DH/toothache in patients with MIH. The findings can guide future research, inform clinical practices and public policy makers, and ultimately improve the management of oral health of patients with MIH. REGISTRATION: PROSPERO CRD42023432805.

Celiac Disease-Related Enamel Defects: A Systematic Review.

INTRODUCTION: This systematic review aims to elucidate the intricate correlation between celiac disease (CD) and dental enamel defects (DED), exploring pathophysiological mechanisms, oral health implications, and a dentist's role in early diagnosis. MATERIALS AND METHODS: Following PRISMA guidelines, a comprehensive search from 1 January 2013 to 1 January 2024 across PubMed, Cochrane Library, Scopus, and Web of Science identified 153 publications. After exclusions, 18 studies met the inclusion criteria for qualitative analysis. Inclusion criteria involved study types (RCTs, RCCTs, case series), human participants, English language, and full-text available. RESULTS: The search yielded 153 publications, with 18 studies meeting the inclusion criteria for qualitative analysis. Notable findings include a high prevalence of DED in CD patients, ranging from 50 to 94.1%. Symmetrical and chronological defects, according to Aine's classification, were predominant, and significant associations were observed between CD severity and enamel defect extent. CONCLUSIONS: The early recognition of oral lesions, particularly through Aine's classification, may signal potential CD even in the absence of gastrointestinal symptoms. Correlations between CD and dental health conditions like molar incisor hypomineralization (MIH) emphasize the dentist's crucial role in early diagnosis. Collaboration between dentists and gastroenterologists is essential for effective monitoring and management. This review consolidates current knowledge, laying the groundwork for future research and promoting interdisciplinary collaboration for improved CD-related oral health outcomes. Further large-scale prospective research is recommended to deepen our understanding of these issues.

Knowledge and management of molar-incisor hypomineralisation amongst dentists in The Netherlands.

BACKGROUND: Molar-incisor hypomineralisation (MIH) is a frequently encountered dental condition in the clinical setting, and correct diagnosis can influence management outcomes. AIM: To assess the knowledge of and attitudes towards the management of MIH amongst dentists in the Netherlands. DESIGN: The study was conducted as a cross-sectional web survey. The questionnaire used included questions regarding respondent characteristics, awareness, knowledge and management of MIH and was distributed through the Royal Dutch Association for Dentistry (KNMT) to a random sample of 900 dentists. Variables were analysed using descriptive statistics, and differences between distinct groups of dentists were tested using the chi-squared test. RESULTS: Respondents consisted of 76.6% general dental practitioners, 9.1% paediatric dentists and 14.3% differentiated (specialist) dentists, with a 25.6% overall response rate. The majority knew the term MIH and its clinical characteristics, and could distinguish MIH from other enamel defects. Regarding aetiological factors, 76.6% reported a genetic component. In an asymptomatic case, 47.3% reported non-invasive treatments. In a mild symptomatic case, treatments from non-invasive to invasive were reported (p < .05). In a severe symptomatic case, the majority reported invasive treatments. Two-thirds of respondents were interested in further clinical training about MIH. CONCLUSIONS: Most respondents knew the term MIH and its clinical characteristics and would like further clinical training about MIH.

DISP1 deficiency: monoallelic and biallelic variants cause a spectrum of midline craniofacial malformations.

PURPOSE: DISP1 encodes a transmembrane protein that regulates the secretion of the morphogen, Sonic hedgehog (SHH), a deficiency of which is a major cause of holoprosencephaly (HPE). This disorder covers a spectrum of brain and midline craniofacial malformations. The objective of the present study was to better delineate the clinical phenotypes associated with DISP1 variants. METHODS: This study was based on the identification of at least one pathogenic variant of the DISP1 gene in individuals for whom detailed clinical data were available. RESULTS: A total of 23 DISP1 variants were identified in heterozygous, compound heterozygous or homozygous states in 25 individuals with midline craniofacial defects. Most cases were minor forms of HPE, with craniofacial features such as orofacial cleft, solitary median maxillary central incisor (SMMCI), and congenital nasal pyriform aperture stenosis (CNPAS). These individuals had either monoallelic loss-of-function variants or biallelic missense variants in DISP1. In individuals with severe HPE, the DISP1 variants were commonly found associated with a variant in another HPE-linked gene (i.e. oligogenic inheritance). CONCLUSION: The genetic findings we have acquired demonstrate a significant involvement of DISP1 variants in the phenotypic spectrum of midline defects. This underlines its importance as a crucial element in the efficient secretion of SHH. We also demonstrated that the very rare SMMCI-CNPAS combination is part of the DISP1-related phenotype. The present study highlights the clinical risks to be flagged up during genetic counseling after the discovery of a pathogenic DISP1 variant.

Accuracy of Dolphin Imaging software in predicting soft tissue changes of Class II Division 1 incisor relationship treated by all first premolar extraction compared with post-treatment lateral cephalogram.

BACKGROUND: To quantify the accuracy of Dolphin Imaging software in predicting soft tissue changes of Class II Division 1 incisor relationship treated by all first premolar extraction compared with actual changes. METHODS: Pretreatment and post-treatment lateral cephalograms of 30 young adult subjects (25 females and 5 males; age range of 16 to 21 years) were imported and traced in Dolphin Imaging software (version 11.95). Tracings of actual treatment results and the Dolphin predicted treatment outcome were superimposed to calculate the prediction errors. The mean difference for the Holdaway soft tissue analysis and at each landmark was measured in both the X and Y axes. Paired t test was used to compare the statistical differences in Holdaway soft tissue analysis parameters. RESULTS: There were significant differences between the predicted and actual values in three parameters of the Holdaway soft tissue analysis (P < 0.05). The overall accuracy of estimation was better in vertical direction than horizontal. Prediction of upper and lower lip landmarks was overestimated horizontally and underestimated vertically, whereas that belonging to chin was underestimated horizontally and overestimated vertically. Soft tissue nasion and soft tissue A-point were most accurately predicted, whereas the least accuracy was found in soft tissue chin region. CONCLUSIONS: Dolphin Imaging Software (version 11.95) can be accurate enough for use in patient communication and education but should be used with caution. It is most accurate in predicting soft tissue changes in the nasion and A-point regions, but least accurate in chin region.

Possible Etiological Factors for the Development of Molar Incisor Hypomineralization (MIH) in Austrian Children.

BACKGROUND: Molar incisor hypomineralization (MIH) is a developmental enamel defect that primarily affects the first permanent molars and sometimes the incisors. Its increasing prevalence worldwide has raised clinical concerns, yet its exact cause remains unknown. This study aimed to assess potential factors influencing MIH development by analyzing the medical history of children aged 6 to 12 years using a questionnaire. METHODS: This study included 100 children aged 6-12 years diagnosed with MIH during dental examination, and 100 age-matched children in the non-MIH (healthy) group from the Department of Pediatric Dentistry, University Clinic of Dentistry, Medical University of Vienna. The parents of the participants completed a two-page questionnaire regarding possible etiological factors of MIH. RESULTS: The data analysis involved 100 children with MIH (mean age 8.5; ±1.3; 52% female) and 100 children in the healthy group (mean age 9.2; ±1.3; 42% female). The optimized binary logistic regression analysis revealed a significant association between MIH development and cesarean-section delivery (OR = 3; CI = [1.5-6.2]) and sixth disease (roseola) (OR = 3.5; CI = [1.5-8.0]). CONCLUSIONS: This study suggests that cesarean-section delivery and sixth disease (roseola) might increase the likelihood of MIH development in children.

Clinical performance of short fiber reinforced composite and glass hybrid on hypomineralized molars: A 36-month randomized split-mouth study.

OBJECTIVES: This study aimed to assess the clinical performance outcome at 36 months of molars with molar incisor hypomineralization and carious lesions, treated with two different restorative approaches following selective caries removal. METHODS: The children aged 6 to 12 years (18 female, 13 male) included in the study had at least two carious permanent first molars diagnosed with molar incisor hypomineralization. Sixty-two molars were restored in a split-mouth design. In all subjects, selective caries removal was performed so that caries was completely removed from the cavosurface walls and only soft dentin was left above the pulp chamber. Short fiber reinforced composite (SFRC; EverX Flow™) covered by micro-hybrid composite (G-Aenial® posterior composite) and Glass Hybrid (GH; Equia Forte® HT) were used as restorative materials. The restorations were evaluated according to modified United States Public Health Service (USPHS) criteria at baseline, 6, 12, 18, 24, and 36 month follow-ups. RESULTS: During the 36-month follow-up, eight GH and four SFRC restorations failed. The clinical success of both restorations decreased statistically over time (p < 0.001 for both). When variables such as restoration type, sex, age, tooth type, and time were included in the model, the risk of failure of the restorations of the left lower first molar was statistically significantly higher than that of the left upper first molar (p < 0.002). CONCLUSION: Direct composite restorations with SFRC and GH restorations perform similar clinical success with selective caries removal in the management of permanent molars affected by molar incisor hypomineralization. CLINICAL SIGNIFICANCE: SFRC or GH restorations with similar clinical success might be preferred for the management of MIH-affected molars.

Influence of alveolar bone thickness and bucco-palatal inclination on root resorption of lateral incisors in unilateral maxillary impacted canines: a retrospective observational study.

BACKGROUND: This study aimed to investigate the potential associations between alveolar bone thickness, bucco-palatal inclination of maxillary lateral incisors, and lateral incisor root resorption in patients with unilateral maxillary impacted canines (UMICs). METHODS: A total of three hundred and five subjects (120 males, 185 females; mean age, 16.39 years; standard deviation, 4.04) with UMICs were included. Canine position and root resorption were assessed using CBCT. UMICs were divided into palatal, buccal and mid-alveolus groups (PICs, BICs and MAICs), with 117, 137 and 51 subjects, respectively. Alveolar bone thickness and bucco-palatal inclination of lateral incisors were measured using the Dolphin software. RESULTS: The prevalence of lateral incisor root resorption was significantly lower in the BICs (13.9%) than MAICs (29.4%) and PICs (29.1%). Alveolar bone thickness of the apical area was smaller in UMICs with lateral incisor root resorption than no resorption in both PICs (8.33 ± 1.64 vs 10.53 ± 2.55 mm) and BICs (8.94 ± 1.85 vs 10.76 ± 2.28 mm). Furthermore, lateral incisors on the impacted side were more buccally inclined in PICs with lateral incisor root resorption than no resorption, while in both BICs and MAICs, there was no statistical difference between lateral incisor root resorption than no resorption. Moreover, alveolar bone thickness of the apical area, rather than bucco-palatal inclination of lateral incisors, was significantly correlated with lateral incisor root resorption both in PICs and BICs. CONCLUSIONS: Lateral incisor root resorption is less common in BICs. Thinner alveolar bone thickness at the apical area of lateral incisors can be considered as a potential risk factor for lateral incisor root resorption in UMICs.

Assessment of diagnostic accuracy and reliability of reveal fluorescence dental loupes in detecting molar incisor hypomineralization in children.

BACKGROUND: Molar-Incisor Hypomineralization (MIH) poses challenges to accurate diagnosis, impacting children's oral health. Traditional methods exhibit limitations, necessitating innovative approaches. This study aimed to evaluate the reliability and diagnostic accuracy Reveal Fluorescence Dental Loupes (RFDLs) for the detection of MIH METHODS: This cross-sectional study, adhering to STRAD guidelines, involved 38 healthy children (age 7-9) with MIH. Ethical approval and informed consent were obtained. Microscope images and Reveal loupes were employed for examinations. Validity was assessed against microscope results, and inter- and intra-examiner reliability were measured using ICC and Kappa coefficients. Sensitivity, specificity, and overall accuracy were calculated, with an AUC-ROC analysis for discriminatory ability. RESULTS: Intra-examiner reliability scores were excellent (Examiner 1: ICC 0.92, Examiner 2: ICC 0.94). Inter-examiner reliability (Kappa 0.92) indicated almost perfect agreement. Reveal demonstrated high sensitivity (82.61 %) and specificity (92.59 %), with an overall accuracy of 88.70 %. AUC-ROC analysis supported its robust discriminatory ability (AUC: 0.871). CONCLUSIONS: Reveal Fluorescence Dental Loupes emerged as a promising diagnostic tool for accurate MIH detection, particularly in outreach settings. The study highlights the transformative impact of accessible and reliable diagnostic tools on pediatric oral health outcomes. While acknowledging limitations and the absence of a gold standard, the findings contribute to advancing MIH diagnostic capabilities. Further research in diverse populations is warranted for comprehensive validation.

Clinical analysis of the tooth-implant papilla for two narrow-diameter titanium-zirconium implants in the anterior area: prospective controlled clinical study.

BACKGROUND: Rehabilitation of the anterior area when the mesio-distal space is reduced is a challenge for the clinician, due to the patient's anatomical limitations and aesthetic requirements. Narrow Diameter Implants (NDI) are an option of treatment when the standard diameter implant is not possible, but the evidence is scarce. This prospective clinical study aims to analyze the formation of the tooth-implant papilla between the implant and the adjacent natural tooth in the maxillary lateral incisors and mandibular incisors. METHODS: A total of 40 patients treated with NDI, of titanium-zirconium (Ti-Zr) alloy i.e., 2.9 mm Test Group (TG) and 3.3 mm Control Group (CG), were included. The mesiodistal distance between the adjacent natural teeth was used for implant selection, maintaining 1.5 mm between the fixation and the adjacent tooth. Clinical assessment was performed by a clinical examiner at 6 and 12 months after the final prosthesis. The primary variable was the Jemt Papillary Index. Also, implant survival rate (SR), complications, Implant Stability Quotient (ISQ), and patient-reported outcomes measures (PROMs) such as aesthetics, chewing, phonation, comfort, and self-esteem were analyzed. RESULTS: A significant amount of papilla filling was observed concerning the baseline, with a trend towards more formation of the papilla in the TG, with a JPI score of 3. No significant differences were observed between the two groups regarding implant SR, clinical parameters, and complications. In terms of PROMs, a higher satisfaction in the TG was observed, with significant intergroup differences for aesthetics, comfort, self-esteem, and primary stability ISQ (TG: 59.05 (SD: 5.4) vs. CG: 51.55 (SD: 5.7)). CONCLUSIONS: The 2.9 mm diameter Ti-Zr implants achieved a formation of papilla similar to 3.3 mm implants in the anterior region at 12 months of follow-up after the final prosthetic restoration. The use of Ti-Zr implants with a diameter of 2.9 mm to rehabilitate single teeth in areas of the anterior region, where the mesiodistal distance is limited, showed favorable clinical results and a high degree of satisfaction during 1 year of observation similar to 3.3 mm dental implants. TRIAL REGISTRATION: This study was retrospectively registered in ClinicalTrials.gov with the number NCT05642520, dated 18/11/2022.

The Effect of Modified Framework Design on the Fracture Resistance of IPS e.max Press Crown after Thermocycling and Cyclic Loading.

AIM: This study aimed to investigate the effect of modified framework (MF) design on the fracture resistance of IPS e.max Press anterior single crown after thermocycling and cyclic loading. MATERIALS AND METHODS: Two types of IPS e.max Press frameworks were designed (n = 10); standard framework (SF) with a 0.5 mm uniform thickness and MF with a lingual margin of 1 mm in thickness and 2 mm in height connected to a proximal strut of 4 mm height and a 0.3 mm wide facial collar. The crowns were cemented to resin dies, subjected to 5,000 cycles of thermocycling, and loaded 10,000 cycles at 100 N. A universal testing machine was used to load specimens to fracture, and the modes of failure were determined. RESULTS: The mean and standard deviation (SD) of fracture resistance were 219.24 ± 110.00 N and 216.54 ±120.02 N in the SF and MF groups. Thus, there was no significant difference (p = 0.96). Mixed fracture was the most common failure mode in both groups. We found no statistically significant difference between the groups (p = 0.58). CONCLUSION: The MF design did not increase the fracture resistance of IPS e.max Press crown. CLINICAL SIGNIFICANCE: Framework design is an essential factor for the success of all-ceramic restorations and its modification might be regarded as an approach to increase fracture resistance. Furthermore, the modified design was evaluated in metal-ceramic or zirconia crowns while less attention was paid to the IPS e.max Press crowns. How to cite this article: Golrezaei M, Mahgoli HA, Yaghoobi N, et al. The Effect of Modified Framework Design on the Fracture Resistance of IPS e.max Press Crown after Thermocycling and Cyclic Loading. J Contemp Dent Pract 2024;25(1):79-84.

Morphometric Comparison and Prognostic Analysis of Permanent Maxillary Central Incisors with Eruption Disturbances-A Cross-Sectional Study.

AIMS: The aim of this study was to retrospectively compare the morphometrics of permanent maxillary central incisors with and without eruption disturbances, while simultaneously evaluating prognosis based on different factors. MATERIALS AND METHODS: Seventy patients with unilateral permanent maxillary central incisor eruption disturbances were included. Within a group of 70 subjects, measurements were taken for both normally erupted central incisors and central incisors with eruption disturbances to determine the length of the roots and the volume of the teeth. Various factors, such as angulation of impaction, and vertical height of impaction, were assessed to investigate their correlation with surgical intervention. RESULTS: Both the root length and tooth volume were significantly smaller in the eruption disturbance incisors than in the normally erupted incisors (p ≤ 0.001). Moreover, there was a statistically significant increase in surgical intervention among cases with no clear physical barrier (primary retention) (p < 0.05) or when adjacent normally erupted central incisors exhibited more than 2/3 of root development (p < 0.05). CONCLUSIONS: The results of this study numerically demonstrated the delayed tooth development of the permanent maxillary central incisors with unilateral eruption disturbances compared to appropriately erupted incisors by measuring root length and tooth volume. The absence of obstacles and the degree of root development in adjacent erupted incisors might serve as factors for clinicians to determine the necessity and timing of surgical intervention.

Knowledge and perception regarding molar incisor hypomineralisation among dental students and dental hygienist students in Spain: a cross-sectional study.

BACKGROUND: Molar incisor hypomineralisation (MIH) has a high prevalence in the Spanish pediatric population and is a precursor of carious lesions in teeth in which it is present. Although this pathology is included in the curricula of the Degree in Dentistry and the Training Cycle in Oral Hygiene in our country, the contents currently taught seem to be insufficient in relation to the level of knowledge that we have today about this condition. METHODS: A digital questionnaire of 18 questions was sent to a sample of 448 students attending the 4th and 5th year of the Degree in Dentistry and 2nd year of the Training Cycle in Oral Hygiene from different universities and vocational training centers in the Valencian Community. Descriptive and multivariate statistical analysis of the data was subsequently performed. RESULTS: Of the 290 questionnaires that were obtained, 53.8% were from students attending the 2nd year of a training course in oral hygiene and 46.2% were from students pursuing a degree in dentistry. Most of the respondents had heard about MIH (75.2%), mainly through master classes. However, most students had difficulties distinguishing MIH lesions from other lesions (58.3%). The degree of knowledge about MIH was greater among dental students in all the aspects evaluated: prevalence, diagnosis, prevention, and treatment. Of all the students, 83.8% were interested in increasing their training on MIH, especially in the areas of diagnosis and treatment. CONCLUSION: The results of the present study justify the need to expand the content on MIH, both theoretical and practical, in the educational curricula of the Degree in Dentistry and Integrated Vocational Training Centers in Spain.

Prenatal exposure to environmental toxins and comprehensive dental findings in a population cohort of children.

Environmental toxins are known to have many impacts on growth and development in humans, starting in utero. Alterations in amelogenesis, caused by chemical and physical trauma that occur during the antenatal, perinatal and postnatal time periods, may result in developmental defects in deciduous and permanent tooth enamel, as demonstrated in animal studies. These defects can be clinically visible and result in a variety of morphological and functional problems in the dentition. Since enamel does not remodel after formation, it may serve as a permanent record of insults during organ development.Our primary purpose was to investigate any possible relationship between intrauterine exposure to endocrine disrupting chemicals (phenols and phthalates) and developmental defects in enamel in children, while also accounting for fluoride exposure. Our secondary purpose was to report descriptively on findings from comprehensive dental examinations performed on 356 children that were drawn from the general paediatric population. A cohort of children from the Utah Children's Project (N = 356) that had full medical exams, comprehensive medical and family histories and available biospecimens were given extraoral and intraoral examinations. They also completed an oral health questionnaire. Standardized intraoral photographs were taken of the teeth and viewed by standardised examiners and the dental observations were recorded for a full inventory of findings, including: tooth morphology, caries, restorations, colorations, attrition, erosion, fractures and hypomineralization. Perinatal maternal urine samples were assessed for the concentration of fluoride, phenols and phthalates, including bisphenol A (BPA).Pairwise statistical analyses were done to correlate the dental findings with one another and with the presence of environment chemicals found in the urine samples. Hypomineralization was the most common finding (96% of children; 37% of deciduous teeth, 42% of permanent teeth), consistent with molar incisor hypomineralization (MIH) described in other human populations. No consistent correlations were seen between dental findings and the presence of phenols and phthalates in prenatal urine, but the number of samples available for the assessment was limited (n = 35).In conclusion, we found a high proportion of dental hypomineralization in a population based paediatric cohort, but did not find an association with prenatal exposure to phenols and phthalates.